Turbo Speed Sensor kit KA Sensor KS1T
The KTSM & KS1T Series of Turbo Speed / Temperature Sensors are designed for direct installation onto the turbo casing.
Sensing is by the Eddy Current Principle to detect the blades (construction of Aluminium or Titanium) as they pass by.
Maximum speed of measurement is 400,000 RPM. The speed signal output can be measured as a TTL or analogue volts and temperature can also be measured at the tip of the sensor.
The KTSM & KS1T Series Sensor function can be determined by a multi-colour LED and also a test signal is available to help optimise the blade to sensor tip gap.
Typical Applications Include: High Shaft Speed - Turbo Speed
- Eddy Current Sensor
- Up to 400,000 RPM
- Includes Temperature Output
- -50°C to +300°C
- TTL & Analogue O/P
- AL or TI Blade Sensing
KS1T Turbo Speed Sensor KS1T05070000 Thread Size: M5 x 0.5mm Cable length: 70 cm (Standard) Special Code: None Speed Range: 0 400,000 RPM Blade Material and Sensing Range: Aluminium: 0.1 to 0.7mm, Titanium: 0.1 to 1.5mm Operating Temperature Range: Sensor: 50°C to +300°C, Sensor Cable: 30°C to +200°C Supply: 930Vdc (Less than 30mA) Temperature Mearurement Range: 50°C to +300°C = 0 to 5V Electrical Connection: Sensor: Deutsch ASL60605SCHE Electrical Connection: Supply/Signal: 50cm 26AWG Cable + DR25 Sleeve Protection Class: IP65 Weight: 135g (Including Sensor, but Excluding Power Cable) Manufacturing Location: United Kingdom Accuracy: ±0.2% FS Linearity, 0.1% of FS Resolution
KTSM Turbo Speed System Controller Electronics KTSM2RSSPR000000 Blade Count Method: Rotary Switch Selectable Blade Count: Rotary Switch Selectable Speed Output 1: 1 Pulse per Revolution Speed Output 2: N/A Special Code: None Operating Temperature: Controller: 30 to +70°C Accuracy Full Scale Linearity: ± 0.2% Accuracy Resolution Full Scale: 0.1% Electrical Connection Sensor: Deutsch ASL60605SCHE Supply: 9 30 VDC, less than 80mA Operating Temperature: Sensor: 50 to +300°C Operating Temperature: Cable: 30 to +200°C IP Rating: IP 65 Weight: 135g including sensor, but excluding power cable Temperature Output: 50 to +300C = 0 to 5V Setup Output: Test signal for setup Electrical Connection Output: 50cm 26AWG 55spec wire + DR25 sleeve Manufacturing Location: United Kingdom
Please NOTE price doesn’t include VAT and it will be added when the payment is made in PayPal