Bosch ABS M5 Kit Clubsport

The ABS M5 Kit Clubsport is designed for use in front-, rear-, or 4-wheel drive vehicles. A generic wiring harness is included in the kit. This enables us to provide the kit at a significantly reduced price compared to the standard ABS M5 Kit with an individual loom.
The ABS M5 Kit Clubsport is specifically adapted for motorsport use. Individual car parameters like e.g. vehicle weight, vehicle track, wheel weights, wheel circumferences, wheel base or number of increments, can be calibrated with software free of charge.
Suitable for front-wheel, rear-wheel and four-wheel drive vehicles
Generic wiring harness to fit all engine bay and front foot well locations for the hydraulic module
Same ABS hardware as standard ABS M5 Kit
 
Technical Specifications
Mechanical Data
Hydraulic unit Serial housing, dust- and damp-proof
Vibration damped circuit board
38 pin connector
2 hydraulic valves per wheel
2 brake circuits (front and rear)
2 hydraulic high pressures pumps
2 hydraulic accumulators 5 cm3/each
Standard fittings
2 x master cylinders M12 x 1
4 x brake cylinders M10 x 1
Size 122 x 110 x 122 mm
Weight 1,910 g
Operating temperature -30 to 130°C
Max. shock 50 g less than 6 ms
Max. working speed 360 km/h = 100 m/s = 224 mph
Pressure Medium DOT 4 brake fluid DOT 5.1 brake fluid
Electrical Data Supply voltage 10 to 16 V
max. 24 V for 5 min Max. peak voltage
35 V for 200 ms
Power consumption Pump 230 W
Power consumption Relay 170 W
Power consumption Electronics 8 W
Inputs
4 active wheel speed DF11i, DF11S or DF11V
Brake pressure (front brake circuit / rear brake circuit)
Longitudinal acceleration, lateral acceleration, yaw rate (MM5.10 sensor)
11 adjustment settings
ABS function can be deactivated (Pos. 12)
Outputs
ABS warning light (MIL)
TTL wheel speed signal FL / FR / RL / RR
Content of Kit and Weights
Hydraulic unit 1,910 g
2 pressure sensors 40 g/each
Yaw/acceleration sensor 60 g
12 position function switch 50 g
4 wheel speed sensors DF11 standard 50 g/each
ABS warning light (MIL) 50 g
Standard wiring harness 1,540 g
Mounting and vibration-damping boards 80 g
Mounting board for hydraulic unit 212 g
Lead Time 1-4 weeks from order 
 
Please NOTE price doesn’t include VAT and it will be added when the payment is made in PayPal