Bosch Motorsport MSA-Box 2

The MSA-Box II is the low cost unit for PC-supported calibration and configuration on Ethernet, K-Line or CAN interface of an ECU.
The MSA-Box II is coupled to the PC via the USB interface. This ensures a powerful and universal link to all common PCs. The coupling to the ECU is effected via Ethernet, K-Line or CAN-interface of the diagnosis interface.
Technical Specifications
Mechanical Data
Size 84 x 38 x 25 mm
Temperature range 0 to 70°C
Compact design Fully suitable for motor vehicle use
All inputs and outputs to the PC with galvanic separation
Electrical Data
Input voltage (vehicle side) 8 to 32 V
Power supply through the connection to the ECU from board mains with galvanic separation
Power consumption (powered by USB) Typ. 0.5 W
USB
USB 2.0, high speed (480 MBit/sec)
Ethernet
100 MBit/sec
K-Line
300 Bd up to 320 kBd
CAN
10 kBit/s up to 1 MBit/s
Recommended Operation System Windows 10
Connectors and Wires
Connector AS612-35PN
F02U.000.441-01
Mating connector AS012-35SN
F02U.000.258-01
Pin 1 Terminal 30 (permanent pos)
Pin 2 Terminal 15 (switch pos)
Pin 3 GND
Pin 4 CAN_High
Pin 10 K-Line
Pin 8 RxD+
Pin 9 RxD-
Pin 11 TxD+
Pin 12 TxD-
Pin 16 CAN_Low
Pin 22 SCR
Diagnosis wire length 2 m
USB wire length 0.5 m
 
Please NOTE price doesn’t include VAT and it will be added when the payment is made in PayPal