IGN4 Ignition Module - 4 Channel MoTeC 41212

IGN4 - Compact Quad Channel Ignition Amplifier 
 
The IGN4 Ignition Module - 4 Channel is a high current
Output current: ignition coil driver for use with most inductive ignition coils.
This device does not incorporate dwell control
Switching time - 12 μs used in systems which offer precise dwell control using multi-tooth crankshaft reference sensors.
 
COMPATIBILITY MoTeC ECU Models • M1 Series (package dependant). APPLICATIONS • Coil-on-Plug coils (e.g. Denso 129700-4410, 129700-3960, 129700-5150, 129700 -3881) • Coils with primary resistance > 1 Ohm
 
SPECIFICATIONS
 
Electrical 4 identical channels, each with:  
 
Output current: – Continuous at 50 °C (case temp)  20 A This device does not incorporate dwell control
Pulsed - 40 A
Switching time - 12 μs
Input threshold: minimum 1.0 V maximum 2.4 V
Input impedance - 15 kΩ to ground
Primary side clamping voltage 410 V
Maximum stored coil energy at peak current 700 mJ
Physical Size: 38.0 x 31.4 x 14.0 mm
Weight: approx 60 g plus connectors
Connectors: – Input: 4 pin DTM male Output: 6 pin DTM male
Maximum case temperature 125 °C