top of page
STW195 - MOTEC STEERING WHEEL

STW195 - MOTEC STEERING WHEEL

SKU: STW195 18309
£9,600.00Price

The STW195 has been meticulously built and tested to FIA specifications, with a robust carbon fibre body and paddles, and an integrated glare-resistant, high resolution display. The 5" LCD screen layout, along with the built-in LEDs, can be fully customised using MoTeC’s powerful software tools.

Each component has been carefully selected with input from professional FIA series drivers to ensure optimum quality, comfort and ease of operation.

Engineered with:

  • 7 x 12 Position rotary dials
  • 6 x Paddles
  • 12 x On / Off buttons
  • 16 x Configurable LED's
  • C125 Display Creator included
  • C125 I/O included
  • Full carbon fibre body
  • Krontec QR03 series quick release.
  • Impressive High Resolution 125 mm (approx. 5") colour LCD display
  • High brightness for sunlight readability
  • Complete customisation of screen layouts via included Display Creator
  • 16 full colour (RGB) LEDs; colour, function and intensity are fully programmable
  • FIA marshalling LEDs for sanctioned events
  • Dedicated radio PTT loop button
  • HVIL (High Voltage Inter Lock) loop
  • Labelling options included
  • Optional internal logging
  • Easily integrates with CAN based devices
  • GPS Lap Timing
  • Supports T2 Telemetry (with upgrade)
  • Display

  • Screen: Colour TFT LCD, anti-reflective
  • Resolution: 800 x 480 resolution, anti-aliased graphics
  • 16 x configurable LED’s
  • Layouts:
    • Selectable fixed layouts
    • Fully customisable display layouts with included Display Creator software.
  • 48 user-defined, scrollable message lines with programmable overrides
  • 3 programmable modes with customisable labels
  • Logging - optional (requires upgrades)

  • 120 MB internal logging memory
  • Logging rates up to 500 samples per second
  • Fast Ethernet download
  • i2 Standard data analysis software included (Pro Analysis upgrade available)
  • Inputs / Outputs

  • 12 x On / Off push buttons
    • including 1 x dedicated radio PTT button
  • 7 x 12 Position rotary dials
  • 4 x On / Off paddles
  • 2 x Analogue 0-5V paddles
  • Internal Sensors

  • 3-axis accelerometer, detection range: +/- 5G
  • Dash temperature sensor
  • Sensor supply voltage
  • Battery voltage
  • Communications

  • 2 x CAN buses
    • 1 x Configurable with programmable CAN bus speed.
    • 1 x Reserved
  • 1 x RS232 port with transmit and receive.
  • 1 x Ethernet Programing / Data logging
  • Power supply

  • Operating voltage: 6 to 17 V DC
  • Operating current: 0.8 A typical at 14 V (backlight and all LED's 100% brightness)
  • Reverse battery protection
  • Battery transient protection
  • Operating temperature

  • Internal: -20 °C to 70 °C (above 60 °C maximum backlight brightness progressively reduced)
  • Typical ambient temperature range in free air: -10 °C to 55 °C
  • Physical

  • Case Material: Full carbon fibre body
  • Quick release system: Krontec QR-30-22P-LW-V*
  • Size:
    • Width ≤302mm
    • Height ≤191mm
  • Weight 1940 grams including quick release system
  • 1 x 22 pin Autosport connector
  • * The STW195 is supplied with the female QR half only, it is not supplied with the male vehicle side QR. It is compatible with any Krontec QR03 series male half. The vehicle side comes in varying sizes and mounting methods (weld on or bolt on) as well as with/without the AS connector. See the Krontec website for part numbers and ordering information.

    Standards

  • UNECE Regulation No. 10 (ECE R10)
  • Sine wave scan according to LV124
  • Design validation shock according to LV124
  • Pre-Defined vibration Stress according to LV124
  • Low Temp Storage according to ISO-16750-4
  • Low Temp Operating according to ISO-16750-4
  • High Temp Storage according to ISO-16750-4
  • High Temp Operating according to ISO-16750-4
  • Temperature Cycling according to ISO 16750-4
  • Thermal Shock according to ISO 16750-4
  • The device is rated to IP65 (Dust and Water)
Quantity
bottom of page